Recent content by E.Reed

Man, sorry to hear that. I have a 2023 LZ0 and my temps stays between 120 and 155 and 155 is rare. When I first bought it and saw the hi temps, I had to do something. I installed a larger PPE trans pan, trans bypass and a larger trans cooler. I have no issues. Pulling my boat here in Texas heat...

I upgraded to a spin on fuel filter. I could go longer but I'll just change it once a year. That is no problem

I've done the same to mine PPE TRANS PAN, teams bypass, bigger trans cooler, OIL pan, spin on fuel filter, Stopped using the shity 0W20 and switch to T6 5W40 HD diesel oil. Installed a 43 gallon fuel tank in the stock location. Trimming the fat is next

I've done all that. PPE pan, trans cooler, and bypass using amsoil 100% synthetic ATF. Temp runs 120 to 155 and that's towing as well. 38K and no issues

I put a new PPE oil pan (12qts) PPE trans bypass and Larger PPE trans cooler at 8000 ans use 100% amsoil ATF. Heat kills. My temps stay between 120-155. No issue thus far. I also have/ upgraded to a spin on fuel filter and a larger oil pan. Factory oil pan doesn't drain all the oil out ( 3/4...

I've never heard of that. I have an LZO and I'm trying to bullet proof mine. I've done some upgrades that I hope it will help. I put a PPE trans pan, trans bypass valve ( temp run 120-155), bigger trans cooler, PPE oil pan because factory oil pans doesn't drain all the oil out (1/2qt ish). A...

Please tell me you do not use 0W20 while towing. I changed viscosity on my LZ0. I tow as well (boat)and 0W20 offers no protection especially for the turbo. I'm running 5W40 HD diesel oil. New ppe trans pan, trans bypass (trans temp 120-155), bigger trans cooler, bigger ppe oil pan, and a spin...

Had a NO START situation. Problem solved, it ended up being a kill switch that was installed wrong. Not getting the proper signal and voltage which confused the ecm/ computer

No start issue resolved. Problem fix, it was an after market kill switch installed wrong and getting mixed signals to and from computer

Problem solved. It was an after market kill switch that was add and hooked up wrong

Problem fix. It was the kill switch that was added and didn't do it correctly. Problem solved

Hello, having the dealership flash the ECM on your truck. Did it fix the no crank issue? I'm not on here much text 325-518-4038

I have a 2023 LZ0, Did the ECM refresh fix the NO START problem. Text 325-518-4038

Did the refresh fix the NO START issue. TEXT ME 325-518-4038

autostopeliminator.com $99